Difference between revisions of "Luna Wheel Station"

From OrbiterWiki
Jump to navigation Jump to search
(Added gallery.)
(Added image.)
 
(2 intermediate revisions by the same user not shown)
Line 9: Line 9:
 
* Port 2 136.20
 
* Port 2 136.20
  
<gallery>
+
<gallery widths="200" heights="200">
 
LunaOB1Orbiter2001.jpg|Luna-OB1 in Orbiter 2001
 
LunaOB1Orbiter2001.jpg|Luna-OB1 in Orbiter 2001
 +
LunaOB1-orbiter2002p3.jpg|<center>Luna-OB1 in Orbiter 2002P3</center>
 +
LunaOB1-Orbiter2003P2.jpg|<center>Luna-OB1 in Orbiter 2003P2</center>
 +
LunaOB1-Orbiter2005P1.jpg|<center>Luna-OB1 in Orbiter 2005P1</center>
 
</gallery>
 
</gallery>
  
 
[[Category: Articles]]
 
[[Category: Articles]]
 
[[Category: Vessels of Orbiter]]
 
[[Category: Vessels of Orbiter]]

Latest revision as of 13:13, 16 September 2024

Luna Wheel Station

Luna OB-1 is a large fictional space station that comes with stock Orbiter simulator in lunar orbit. It consists of a wheel, attached to a central hub with two spokes. The wheel has a diameter of 500 metres and is spinning at a frequency of one cycle per 36 seconds, providing its occupants with a centrifugal acceleration of 7.6 m/s2, or about 0.8g, to mimic Earth’s surface gravitational force.

The main problem the station poses to the spacecraft pilot is in performing a docking maneuver. Docking to a rotating object is only possible along the rotation axis. The wheel has two docking ports in the central hub. The docking approach is performed along the axis of rotation. Before docking, the approaching vessel must synchronise its own longitudinal rotation with that of the station.

The wheel station sends a transponder signal at frequency 132.70. The default IDS transmitter frequencies for the two docking ports are

  • Port 1 136.00
  • Port 2 136.20